Research-based educational guidance. Model-specific procedures and professional review are not claimed. How these guides are prepared · Report a correction
Before you begin: Use your RV and component manuals for model-specific procedures. Stop and use a qualified professional for electrical, propane, structural, or other work beyond your training.
Departure check and sign-off
Fill this worksheet from the labels and instructions for your actual equipment. Entries are not transmitted or saved; print a copy before leaving. Blank fields are intentionally yours to complete.
| Walkaround item | Checked | Finding / action |
|---|---|---|
| Tires: cold pressure and visible condition | ||
| Lights, mirrors, doors and steps | ||
| Installed hitch / tow connection checks | ||
| Slides, awning, jacks and exterior equipment secured | ||
| Power cable and water / sewer hoses stowed | ||
| Cabin items secured; final walkaround complete |
Six systems, one maintenance record
Road & running gear
Tires, brakes, running gear, and chassis where fitted
Weather protection
Roof, seams, windows, slide seals, and signs of moisture
Power & batteries
Battery type, charging equipment, and visible damage
Water & plumbing
Fresh supply, leaks, holding tanks, and freeze protection
Appliances & airflow
AC, refrigerator, water heater, and clear ventilation
Safety equipment
Alarms, emergency equipment, and documented service
Start with tires and loading
Check tire condition and cold inflation against the RV and tire specifications. Look for cuts, bulges, unusual wear, or visible damage. Verify the load and cargo are within the applicable ratings; water, fuel, passengers, and gear all count.
A tire-pressure monitoring system can help during travel but does not replace a hands-on pre-trip check. See a tire professional for a suspect tire.
Walk around the exterior
Check running lights, brake lights, turn signals, mirrors, doors, steps, storage bays, windows, awnings, roof-mounted equipment, and anything carried outside. Confirm jacks and stabilizers are in travel position as the equipment maker directs.
Look beneath the RV for fresh fluid or water leaks. Do not start a trip with a known brake, steering, hitch, or wheel problem.
Verify towing connections if applicable
For a trailer, follow the hitch or pin-box instructions for coupling, latching, safety chains, breakaway cable, electrical connector, and trailer-brake test. For a towed car, use the tow-bar, baseplate, braking, and vehicle manufacturer procedures.
Different coupling systems have different steps. Use a written check for your installed components rather than a generic memory shortcut.
Secure the cabin and confirm safety equipment
Latch cabinets and the refrigerator as directed, secure loose items, close vents and windows for travel, and verify occupants are seated and belted. Test detectors and check fire extinguisher status under their manufacturer instructions.
Make sure shore-power cable, water hose, sewer hose, and chocks are disconnected or stored as appropriate. A final slow walkaround often catches what the first pass missed.
Keep a short personal version
Add steps unique to your RV, such as slide-outs, leveling gear, antenna, satellite dish, or a second fuel or propane system. Put the list where the driver will actually use it. Review it when equipment changes.
A credited owner checklist: what an experienced RVer never skips
In a WinnebagoLife pre-trip article, long-time RVer James Adinaro identifies tire and wheel checks, detectors, emergency equipment, batteries, and key appliances among the items he checks before travel. His list is a useful example of a repeatable owner routine, not proof that any specific RV is roadworthy and not a checklist personally tested by RV Method.
Use his credited WinnebagoLife checklist, linked below, as a prompt to build your own route around the vehicle. Add the hitch, brakes, lights, load, and model-specific departure steps from your manuals. A failed light, tire concern, or detector fault remains an open item until checked or repaired by the right professional.
Example: a failed brake light before departure
This is a documentation-based scenario, not a record of work performed on a particular RV.
Manual or source: 2024 Winnebago Towables owner manual
- During a 2024 Winnebago towable walkaround, the owner finds that one exterior brake light does not illuminate.
- Delay departure, document the failed light, and check only the owner-level connector and lamp procedures for the exact trailer. A persistent wiring or brake-control fault needs a qualified trailer technician.
Manufacturer manuals & further reading
Use these official resources to find details for your equipment. Match the brand, model, and revision; another RV’s procedure may not apply to yours.
- NHTSA tire safety and maintenance
Understand tire labels, inflation checks, damage, and aging. Your RV and tire specifications determine the appropriate load and inflation requirements.
- Jayco owner support and manuals
A starting point for Jayco owner manuals and product support. Use the manual for your RV and the separate instructions for its installed appliances.
- Winnebago operator manuals
Find Winnebago manuals by model year. Match the model and serial-number range before using a schedule, plumbing layout, or storage procedure.
- James Adinaro: RV trip checklist items
Credited long-time owner’s repeatable pre-trip checks; add the steps required for your own RV.
Keep a record: Use the tire pressure log →