Before you begin: Use your RV and component manuals for model-specific procedures. Stop and use a qualified professional for electrical, propane, structural, or other work beyond your training.
Track the trailer, its systems, and the tow connection
Road & running gear
Tires, brakes, axles, hitch, and tow connection
Weather protection
Roof, seams, windows, slide seals, and signs of moisture
Power & batteries
Battery type, charging equipment, and visible damage
Water & plumbing
Fresh supply, leaks, holding tanks, and freeze protection
Appliances & airflow
AC, refrigerator, water heater, and clear ventilation
Safety equipment
Alarms, emergency equipment, and documented service
Start with the trailer’s own manual
A travel trailer does not have an engine, but its running gear needs serious attention. Combine the trailer manufacturer’s maintenance schedule with the instructions for axles, brakes, tires, hitch, appliances, and water system.
Set reminders by both time and mileage when a component specifies both.
Inspect the tow system
Before every trip, inspect the coupler, safety chains, breakaway cable, electrical connector, and weight-distribution or sway-control components if fitted. Confirm all lights work and the trailer is loaded within its ratings.
Service brakes and wheel bearings at the intervals specified by the axle manufacturer. If you are not trained for that work, use a qualified trailer shop.
Protect against water damage
Inspect roof seams, windows, doors, slide-outs, and exterior penetrations. Look inside cabinets and corners for staining or soft surfaces. Clean and reseal only with products compatible with the trailer’s materials.
A small leak can spread behind finished surfaces, so investigate recurring moisture promptly.
Maintain the living systems
Test shore power, batteries, propane detectors, water pump, water heater, AC, furnace, and holding tanks before travel. Follow a winterization plan if temperatures can freeze the plumbing.
Keep the trailer clean, dry, and secure during storage. Maintain a simple log so every inspection has a date and next action.
Manufacturer manuals & further reading
Use these official resources to find details for your equipment. Match the brand, model, and revision; another RV’s procedure may not apply to yours.
- Jayco owner support and manuals
A starting point for Jayco owner manuals and product support. Use the manual for your RV and the separate instructions for its installed appliances.
- Lippert component owner manuals
Browse manuals for slide-outs, awnings, running gear, and water components. Identify the installed system before following lubrication or adjustment instructions.
- NHTSA tire safety and maintenance
Understand tire labels, inflation checks, damage, and aging. Your RV and tire specifications determine the appropriate load and inflation requirements.
This guide is general educational information, not a substitute for your RV’s manuals or professional inspection.